Our Captive Plate . . . Easy to Assemble . . . Can't Fall Off
Follow these easy steps to assemble your plant marker.

2. With the plate and post in the above orientation, insert the ends of the legs into the two round holes of the plate as shown in picture two.

3. Slide the plate along the legs until it passes around the bend in the legs as shown in picture three.

4. Continue sliding the plate until it is positioned beyond the closed loop end of the legs as shown in picture four.

5. Reverse the sliding direction of the plate being sure to thread the closed loop end of the legs thru the oblong hole in the flange of the plate as shown in picture five.

6. The Kincaid Gardens fully assembled plant marker in its "garden ready" position.

7. Kincaid Gardens plant marker with the plate in it's "captured" position...it can't fall off....Your plate can only come off by reversing the procedure above. If by chance it should slip to the position shown in picture seven, it is stopped at the loop and still remains in an easily read position.